This book identifies the science of industrial security which seeks to reduce incidents in the industrial field to the minimum level, and to reduce the costs of injuries caused by incidents which are of direct relation to work incidents.
The book is presented in six chapters.
The first chapter addresses the study problem and its importance.
The second chapter reviews the objectives of industrial security and relevant obstacles.
The third chapter highlights industrial safety.
The fourth chapter sheds light on fire prevention and firefighting through:
. Fire prevention.
. Firefighting.
. Fire regulations and instructions.
. Fire evacuation instructions.
. The importance of a firefighting plan in industrial facilities.
. Risks and nature of industrial fire.
. Firefighting strategy and tactics.
The fifth chapter shows instructions and regulations through:
. Instructions.
. Types of instructions.
. Industrial safety and security instructions.
. General instructions for the prevention of industrial hazards.
. Safety and firefighting requirements.
. Storage requirements.
The sixth chapter is devoted to the role of preventive industrial security in environmental pollution, through:
. Environmental Pollution.
. The role of industrial security in industrial environmental pollution control.
. Air pollution.
. The role of industrial security in air pollution control.
. Water pollutants.
. The role of industrial security experts in water pollution control.
. Soil pollutants.
. The role of industrial security in soil pollution control.
. The bombing of Kuwaiti oil wells.
. Nuclear leakage.
. Waste recycling as a form of environmental protection.
. Pollution control regulations and instructions.
The book concludes with the conclusion, findings, and recommendations.
In the findings, it stresses that the work of firefighting devices should be integrated.
Within its recommendations, the book stresses that the approved curricula and courses should the subject of industrial security in its comprehensive and modern concept.
أولًا: المراجع باللغة العربية
- أورفــلي، عــلي (1996م). مذكرات عــن قواعد الســلامة، المركز العربي للدراسات الأمنية والتدريب، الرياض: المملكة العربية السعودية.
- أورفلي، علي (د.ت). الأمن الصناعي المعاصر، بيروت، لبنان: دار الهاشم.
- الباز، فــاروق (1412هـ). حوار تلفزيوني مباشر عن آثار حرائق النفط في منطقة الخليج، القناة الســعودية، 20 رمضان. مكتبة الملك فيصل للبحوث.
- دليل الأمــن الصناعي (1404هـ). شركة مصفاة جــدة للبترول، جدة، المملكة العربية السعودية.
- الدوسري، سلطان بن محمد (1428هـ). تقرير عن حرائق المواد البترولية، الرياض: معهد تدريب الدفاع المدني.
- الــدوسري، غنام (1406هـ). الحماية الأمنية للمنشــأة الصناعية، الندوة الخامســة للأمن الصناعي، أبها، المملكة العربية السعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- رمضــان، الســيد (1984م). حــوادث الصناعــة والأمــن الصناعــي، الإسكندرية: المكتب الجامعي الحديث.
- صقر، رشــاد أحمد (1404هـ). الأمن الصناعــي في المملكة، الندوة الثانية للأمن الصناعي، الجبيل، المملكة العربية السعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- الطريقي، عبد الله بن إبراهيم (1425هـ). المفهوم الشرعي لسلامة المنشآت، بحث مقدم لمؤتمر الدفاع المدني العشرين «سلامة المنشآت.. أهداف وغايات»، الرياض، المملكة العربية السعودية.
- عبد العزيز، نبيل (1408هـ). التخطيــط لمواجهة أخطار التهديد بالقنابل، الندوة السابعة للأمن الصناعي، الجبيل، المملكة العربية السعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- علي، حمــداني (1995م). الســلامة والأمن الصناعي، مراكــش، المملكة المغربية: جامعة القاضي عياض.
- العمرو، صالح عبد الرحمن (1411هـ). السلامة العامة ودور البلديات في تحقيقها، الرياض، المملكة العربية السعودية: الندوة الأولى للسلامة والوقاية من الأخطار.
- القاضي، أحمــد (1996م). دليل الأمن والســلامة الصناعية دون ناشر، القاهرة.
- أبو الليف، عبد المحســن (1405هـ). التنظيم والتدريب والتطبيق لأساليب السلامة الصناعية، الندوة الرابعة للأمن الصناعي، الظهران، المملكة العربية السعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- أبو الليف، عبد المحســن (1408هـ). الجــدوى الاقتصادية والعملية من تطبيقــات تعليمات الأمن والســلامة، الريــاض، المملكة العربية السعودية: دار الهلال للأوفست.
- أبو الليف، عبد المحســن (1423هـ). الأمــن الصناعي، الرياض، المملكة العربية السعودية: محاضرات بجامعة نايف العربية للعلوم الأمنية.
- أبو الليف، عبد المحســن (1996م). الأمن الصناعــي، الرياض، المملكة العربية السعودية: جامعة نايف العربية للعلوم الأمنية.
- المبــارك، حمود مريحيل (1406هـ). الدور المتميــز والمطلوب لإدارة الأمن الصناعي، الندوة الخامســة للأمن الصناعي، أبها، المملكة العربية السعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- المبارك، حمــود مريحيــل (1408هـ). طرق وأســاليب الأمــن الصناعي في مكافحــة الجريمة، الندوة الســابعة للأمــن الصناعي، الجبيل الصناعية، المملكة العربية الســعودية: الأمانة العامة للهيئة العليا للأمن الصناعي.
- نــوري، طلال محمد (1409هـ). الأمن الصناعي: أمن ـ ســلامة ـ إطفاء، بحث تخرُّج الــدورة التأهيلية الـ18 للضبــاط الجامعيين، المعهد العالي للدراسات الأمنية، الرياض: المديرية العامة لكلية الملك فهد الأمنية.
ثانيًا: المراجع باللغة الإنجليزية
- Al Shahrany, A. Bradley, D. and Woolley, R. (2005). Development of Instabilities in Closed Vessel Laminar and Turbulent Explosions. Twentieth Colloquium on Combustion Dynamics and its Reactive Systems, Montréal, Canada.
- Al Shahrany, A. (2004). Experimental and Theoretical Studies of Combustion Rates at High Pressure. Ph.D. Thesis, University of Leeds.
- Anatoly, A.Vasilev. (2007). Estimation of the Critical Conditions for Ignition, Deflagration Transition and Detonation. ICDERS, Poitiers, France.
- Andrews, G. E. and Bradley, D. (1972). Determination of Burning Velocities: A Critical Review. Combust. Flame 153-133 :18.
- Beck, Vaughan. (1997). Performance-Based Fire Engineering Design and its Application in Australia. Proceedings of the Fifth International Symposium on Fire Safety, Melbourne, Australia, P: 23.
- Bradley, D. Gaskell, P. H. and Gu, X. J. (1996). Burning Velocities, Markstein Length, and Flame Quenching for Spherical Methane-Air Flames: A Computational Study. Combust. Flame 198-176 :104.
- Chomiak, J. (1990). Combustion. A Study in Theory, Fact and Application. Gordon and Breach, NY.
- Clavin, P. (1985). Dynamic Behavior of Premixed Flame Fronts in Laminar and Turbulent Flows. Prog. Energy. Combust. Sci. 59-1 :11.
- Darrieus, G. (1938). Propagation d’un Front de Flamme: Assai de Théorie des Vitesses Anomales de Déflagration par Developpement Spontané de la Turbulence. Presented at 6th Int. Cong. Appl. Mech. 1946, Paris.
- Friedman. (1998). Principles of Fire Protection Chemistry. (Third Edition). AFPA.
- Fristrom, R. M. and Westenberg, A. A. (1965). Flame Structure. McGraw-Hill, NY.
- Griffiths, J. F. and Barnard, J. A. (1995). Flame and Combustion. Blackie Academic & Professional: An Imprint of Chapman & Hall.
- Hadijsophoclecous, G. V. and Zhuman F. (2003). A Fire Risk Computer Model for Commercial Timber Frame Buildings. Fourth International Seminar: Fire and Explosions Hazard, London Derry, Belfast P: 79.
- Hadijsophoclecous, G. V. Benichou, N. Torvi, A. A. and Reid, (2000). Evaluation Compliance of Performance– Based Design with Fire Safety Objectives, Proceedings of the Third International Conference on Performance-Based Codes and Fire Safety Design Methods, Lund, Sweden, P:307.
- Law, C. K. and Sung, C. J. (2000). Structure, Aerodynamics, and Geometry of Premixed Flamelets. Progress in Energy and Combustion Science 26, 459-505.
- Lewis, B. and Von Elbe, G. (1987). Combustion, Flames and Explosions of Gases. Academic Press, London.
- Liu, K. Burluka, A. A. Woolley, R. and Sheppard, C. G. W. (2001). On the Development of the Mass Burning Rate. The Third Asia-Pacific Conference on Combustion. Seoul, Korea.
- Mallard, E. and Le Chatelier, H. L. (1883). Recherche sur la Combusion des Mélanges Gazeux Explosives. Ann. Mines, 8eme serie. t IV, 274.
- Rallis, C. J. and Garforth, A. M. (1980). The Determination of Laminar Burning Velocity. Prog. Energy Combust. Sci. 6, 303-329.
- Toshisuki, H. (2002). Combustion Science for Safety: Twenty-Ninth Symposium (International) on Combustion, Part 1, Combustion Institute, Sapporo, Japan 180-167 :29.
- Turns, S. R. (1996). An Introduction to Combustion: Concepts and Applications. McGraw-Hill Book Company.
- Yung, D. Hadijsophoclecous, G. V. and Proulx, G. (1997). Modeling Concepts for Risk-Cost Assessment Model Firecam and its Application to a Canadian Government Office Building. Proceedings of the Fifth International Symposium on Fire Safety, Melbourne, Australia, P:619.